9 Delta Drive, Unit F
Londonderry, NH 03053
Toll Free: (800) 932-4825
New England's #1 Woodworking Sales and Service Professionals !

Call for Price
Product Name
SCM S2000FRT automatic edgebander
Serial #
In Stock


1 – Used SCM S-2000 FRT Edgebander, New in 2008, complete as follows:

- .4 to 15 mm edge banding thickness

- Panel thickness 3/8" to 2-1/8"

- Min. panel length 5.5"

- Min. panel width 2-1/4"

- Min. distance between panels - 28" (32" with corner rounding)

- PC controlled with 15" flat screen display, mouse and keypad

- Capable of storing in excess of 100 programs

- Automatic loader for coiled edge banding and automatic feed magazine for strips

- Heavy duty guillotine for 3 mm

- Pre-milling unit with (2) 5.5 HP motors operating at 12,000 RPM (jump action controlled through the PC)

- Infeed fence with mechanical digital indicator and pneumatic panel spacing device to prevent operator from feeding panels to close to one another

- Electronic positioning of the pressure beam

- QMS glue station (granulated hopper with automatic feeding to the lower glue reservoir)

- Servo driven pressure section consists of (1) large driven roller and (2) idle rollers, all pneumatically controlled

- Pressure section is also equipped with pneumatic jumping so the unit activates exactly on the leading/trailing edges

- (2) .50 HP end trims on THK guides with pneumatic tilt (two preset positions)

- (2) 1.33 HP 12,000 RPM top and bottom flush trims with pneumatic in/out movement

- (2) 1 HP 12,000 RPM top and bottom fine trims with pneumatic in/out movement and servo driven motors to go from one material thickness to another through the controller (both top and bottom trims tiltable 0 to 15 degrees)

- 2-Motor corner rounding unit with (2) .8 HP motors

- The unit can go from thin tape to 3 mm pvc through the controller with no manual adjustments

- In/out positioning through the controller as well

- Corner rounding unit can operate at 60 FPM

- Top and bottom profile scraping unit with pneumatic in/out movement (movement is controlled through the PC)

- Glue scraping unit

- (2) .25 HP top and bottom oscillating buffing units

- Edge reactivation unit (single hot air blower and directional heat shield)

- 4.5 HP 2-speed feed - 40 to 60 FPM

- All high frequency motors powered by a vari-speed inverter

- Interior lights and sound/safety enclosure

- Multitap transformer

- Machine dimensions: 23' long x 64" wide x 80" tall

- Machine weight: 7,276 lbs.

Copyright © Akins Machinery, Inc. -