New England's #1 Woodworking Sales and Service Professionals
SCM Sandya 10/S KRR 110SW three head 43" wide belt sander/Sandya 10/S KRR 110 SW
Call for Price
Manufacturer
SCM
Product Name
SCM Sandya 10/S KRR 110SW three head 43" wide belt sander
Model
Sandya 10/S KRR 110 SW
Serial #
AE/025188
Year
2001
Condition
Used
Hits
1041
Status
In Stock

1 – Used 2001 SANDYA 10/S KRR 110 SW

43’’ Triple Head Planer / Wide Belt Sander

*Serial# AE/021588

 

MODEL                                             DESCRIPTION

SANDYA 10/S KRR 110 SW           43 inch 3-HEAD WIDE BELT SANDER

Planer Sander                                 230 volt (dual voltage conversion kit to 480 available)

 

STANDARD EQUIPMENT:

·   First sanding group helicoidial cutter block in aluminum alloy with 180mm (7 in.) diameter

·36 hp @ 60 hz main motor sanding at 18 meters per minute

·Sectional infeed pressure bar

·60 anti-kickback fingers

·14x14x2 mm Carbide throw away knives

 

·     Second Sanding Group grooved 65 shore rubber roller with 180mm (7 in.)

·30 hp @ 60 hz main motor sanding at 18 meters per min

 

·     Third sanding group grooved 45 shore rubber roller with 230mm (9 in.)

·18 hp @ 60 hz main motor sanding at 18 meters per minute

 

·     Machine standard features

·     Floating pressure shoes in position 1-3 for increased panel grip

·     Rubber pressing roller in position 4

·     Anit-Kickback device

·     3 hp variable speed feed unit.  Feed speed is from 15 fpm to 70 fpm

·     Automatic conveyor belt tracking

·     5 roller Infeed and outfeed table extensions

·     Pueumatic on/off for working units

·     Extra sturdy robotic welded base with top ground for zero reference point

·     Control panel with dust proof membrane keyboard

·     Y-Delta two-stage reduced voltage starter on main motor

·     Automatic Table Positioning Device

·     Electronic digital thickness readout of work table position

·     Powered table lifting by means of four heavy duty motor and lifting columns double fastened at both top and bottom of the lifting columns to provide exceptional table stability

·     Accurate and reliable electronic tracking of abrasive belt and air jet cleaning device

·     Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt

·     Front and rear  emergency stop buttons

·     Automatic trouble shooting panel and emergency stop of machine for:

- sanding belt breaking, tensioning, overtracking

- opening of the access door to the operating groups

- absence of compressed air

- overload on main motors

·     Amperage meter for main motors allows maximum utilization of available horsepower

·     Main disconnect switch with the ability to be locked out by padlock

·     In feed flexible steel hold down, and anti-kick back plate

·     50 shore, negative profile (waffle style) rubber feed mat

 

 

 

SPECIFICATIONS:

Working Width                                                                                                            43 “

Number of Heads Available                                                                                         3

Motor HP Available:

                              First Sanding Group                                                                      36 hp

                              Second Sanding Group                                                                  30 hp

                              Third Sanding Group                                                                     18 hp

                              Feed Motor                                                                                   3 hp

Maximum Work piece Thickness                                                                              6.25 in.

Minimum Work piece Length                                                                                    16 inches

Abrasive Belt Size                                                                                                  43 in. X 103 in.     

Compressed Air Requirements                                                                                 5 cfm. @ 80 psi.

Dust Outlets                                                                                                           3 outlets @ 6025 in.

Exhaust Requirements                                                                                            3600 cfm.

Power Requirements                                                                                               219 amps @ 230 Volts

Approximate Machine Weight                                                                                  7,600 lbs.

Related Equipment
SCM Sandya 10/S KRR 110SW three head 43" wide belt sander

Details >

Related Accessories
No item found
CALL FOR PRICE.